As a courtesy to our customers, we do caulking free of charge! However, because this is a courtesy service done in efforts of providing the most complete job possible and is free to our customers, we require all subsequent caulking touch-ups, etc to be done by our customers. Also, all caulking will stain and wear through the months and years as well, therefore we recommend that our customers subsequently replace the caulk as desired.

We appreciate any preliminary cleaning, we will still have to re-clean with our special cleaners in order to properly prepare for the application of our coating.

In some cases, we will “mask” (cover/protect) areas including the overflow valve, faucet and drain cap, protecting it from any finish. Materials used to “mask” can be removed after the refinishing is complete leaving masked areas undisturbed during the process.

When necessary, we may remove the overflow valve, faucet and drain cap to ensure a good seal on your refinishing project. Although, some plumbing parts may be corroded and break, In such instances, we cannot be held responsible. If these parts break, we can repair at an additional cost.

Generally a tub reglazing may take 2-4 hours. Tub and tile surround (tiles around tub area only) will take 4-6 hours. This does not include any time to remove any old paint from a previous refinish if present.

We tell our customers to expect 15-20 years from the date of our reglazing!

Absolutely not. Our finish is applied using an HVLP sprayer and our products looks very smooth and shiny as in the automotive industry. Our professional products look very similar to automotive finishes after it has cured. Many customers can not tell the difference between our finish and a brand new tub!

No, you can not use a bath-mat on any reglazed surfaces. This will damage your tub. We do offer our slip-resistant finish on the bottom on your tub that we can offer as a very good and popular substitute.

We will absolutely do our best towards patching or sanding down any visible chips or cracks. Depending on the severity, our fixes may not result in a “perfectly seamless” look after it is reglazed. However, our technicians are trained to provide the best possible outcomes by “engineering” the best solutions for these conditions.

Absolutely. We’ve found that 99% of our customers have no problems while being present when a refinishing job is being performed. This is so because we deploy heavy duty blower systems that ventilate fumes from the homes of customers and often keep any smells from escaping the work area. Customers are often surprised when comparing our reduced amount of fumes to many of our competitors.

Please allow 24 hours before using the tub or tile areas reglazed before using it.

There is not much that we ask for our customers to do. Our job is very convenient and is virtually effortless for our customers. You can however, remove loose objects from the bathroom (or work area), such as tooth brushes, bottles, paintings, shower curtains, soap and towels, so that they will not be exposed during the job.

We accept cash, check and any major credit card; such as Visa, Mastercard, Discover or American Express. Please note that for all credit card payments we will add a 5% processing fee.

To begin any reglazing project, we require a 30% down payment. The balance will become due at the completion of your reglazed space. Please note that if you decide not to go ahead with reglazing, your down payment is NON-REFUNDABLE.